ICMST-Tohoku 2018
Oct. 23 - 26, 2018
Sendai, Japan
ICMST-Shenzhen 2016
Nov 1 - 4, 2016
Shenzhen, China
ICMST-Kobe 2014
Nov 2(Sun) - 5(Wed), 2014
Kobe, Japan
Nuclear Regulation Authority Outline of the New Safety Standards for Light Water Reactors for Electric Power Generation
For Public Comment
Outline of New Safety Standard (Design Basis)
For Public Comment
New Safety Standards (SA) Outline (Draft)
For Public Comment
Outline of New Safety Standard(Earthquake and Tsunami)(DRAFT)

Vol.10 No.2(Aug)
Vol.10 No.1(May)
Vol.9 No.4(Feb)
Vol.9 No.3(Nov)

< Other Issues


Occasional Topics
OTjapan Measures for Tsunami Striking Nuclear Power Station in Japan
Special Article: The Great Tohoku Earthquake (1)
OTjapan The Tragedy of “To Be” Principle in the Japanese Nuclear Industry
EJAMOT_CN3_Figure1_The_outside_view_of_CEFR OTChinaPlanning and Consideration on SFR R&D Activities in China
< All Occasional Topics

Featured Articles
EJAM7-3NT72 A New Mechanical Condition-based Maintenance Technology Using Instrumented Indentation Technique
EJAM7-3NT73 Survey robots for Fukushima Daiichi Nuclear Power Plant

(in English)


Vol.11 No.2previousAA157- SP20 (AA158-159-160-161-162) NT94

Academic Articles
Regular Paper Vol.11 No.2 (2019) p.79-p.85

Numerical Investigation on Persistence of Modified Residual Stresses Due to Shot Peening


Kazuki IKUSHIMA1,*, Yusuke YAMADA1, Masakazu SHIBAHARA1, Koichi AKITA2 and Satoru NISHIKAWA3

1 Osaka Prefecture University, 1-1 Gakuencho, Naka-ku, Sakai, Osaka 599-8531, Japan
2 Tokyo City University, 1-28-1, Tamatsutsumi, Setagawa-ku, Tokyo, 158-8557, Japan
3 Iwate University, 4-3-5, Ueda, Morioka, Iwate, 020-8551, Japan

In this research, to investigate the persistence of compressive stress on a shot peened surface, the residual stresses in a multi-pass welded pipe joint after shot peening were analyzed. Then, the variation of the stress distribution in the welded pipe was examined by elastic plastic analyses under axial tension and compression with consideration of the shot peened residual stress distribution. As a result, it was found that the stress distribution remains in compression by applying tension followed by compression. It was also found that the compressive stress can decrease by applying compression followed by tension. From the above results, it can be said that the persistence of compressive stress due to shot peening should be discussed before the peening operation, especially a large load can be assumed to act on the shot peened part.
Shot peening, Residual stresses, Multi-pass welding, Elastic-plastic analysis, Finite element analysis
Full Paper: PDF EJAM Vol. 11 No. 2 pp. 79-85 "Numerical Investigation on Persistence of Modified Residual Stresses Due to Shot Peening "
Article Information
Article history:
Received 15 October 2018
Accepted 11 September 2019